.png)
.png)
.png)
Simple structure. easy to maintain
Easy to operate
Measuring fixture is a three -jaw chuck for a wide range of application
Balanced measurement and correction of dynamic balance. high efficiency
Applicable to small workpieces
| Technical data at a glance | PHLD-35H |
| Max Mass of Workpiece (kg) | 35 |
| Max Diameter of Workpiece (mm) | Φ180~450 |
| Height of workpiece(mm) | 200 |
| Spindle speed(r/min) | 800~850 |
| Motor power(kw) | 1.53) |
| Min Achievable Residual Unbalance Amount (emar) | 1g · mm/kg |
1) With hood
2) Without hood
2) Without hood
3) Frequency conversion