JP New Products DM-4 Portable Balancing Machine is in short supply---JP’s DM-4 on-site balancing instrument is in short supply

Although the rotor has undergone excellent dynamic balancing before leaving the factory, reasons such as installation, wear or operation can still cause new unbalance in the rotor. Unbalance can cause the machine to vibrate during operation, which in turn leads to many adverse consequences, such as premature wear of bearings, reduced fatigue strength or shaft deformation, etc. However, rotor unbalance is not the only possible cause of vibration. There is no need to disassemble the fan for balancing every time the equipment vibrates. This not only takes a lot of time and effort but also may not truly solve the problem. The vibration may be caused by a single factor or a combination of several factors. For instance: loose foundation, poor connection and alignment, damaged bearings, unbalanced fan rotor, etc.
The Shanghai JP DM-4 on-site balancing instrument features a dual function of vibration analysis and on-site balancing, allowing for direct online unbalance detection and correction. It greatly eliminates the cost consumption of disassembling, assembling and transporting the fan rotor back and forth, as well as the shutdown and production halt. The larger the equipment unit, the greater the value demonstrated by the DM-4 online service.
With the help of the DM-4 on-site balancing instrument, dynamic balancing of rotors of any size and weight can be performed quickly, economically and accurately on the production site without the need to disassemble the machine. The on-site balancing instrument is equipped with a powerful diagnostic function, which can detect the vibration status of the machine in real time, thus ensuring the normal operation of the machine.
The advantages of the DM-4 on-site balancing instrument
+ High-performance tools
With powerful measurement and analysis capabilities, it can provide you with highly effective assistance during on-site balancing. The most ideal application scenarios: machine debugging, service and maintenance. In addition to on-site balancing, on-site balancing instruments are truly flexible and applicable assistants in many other fields, such as the diagnosis of machine conditions, vibration measurement and assessment, bearing condition evaluation, impact tests, and the archiving and management of measurement results, etc
+ High cost-performance on-site balancing instrument
The on-site balancing instrument is equipped with all the necessary configurations for on-site balancing, including: an acceleration sensor and a laser phase sensor each with a magnetic base and connection cable, a power supply and a USB connection cable. More functions are optional.
+ More convenient operation
The on-site balancing instrument can be operated anytime and anywhere with one hand. The display results and files are based on the commonly used Windows interface.
However, due to various reasons before, JP's DM-3 on-site balancing instrument was in a state of long-term shortage. Recently, the headquarters of Shanghai JP stated that it will increase the supply in the market of DM-4, the upgraded version of DM-3. If you also have the purchase need, welcome to contact our sales or engineers.