Manual loading or unloading
Can meet multi-angle weight-removing requirement
Rigid structural design longer service life
Belt-drive model,higher accuracy and greater convenience
New iteration JP-900 electric measuring system with 12inch touch screen
Man-machine interface can memorize the production capacity and real-time production information
Special balancing machine used for generator rotor,can eliminate the unbalance caused by processing and assembly errors,reduce vibration caused by unbalance

Generator Rotor Drilling Two-Station Automatic Balancing Machine

Technical data at a glance	A₂WZ₉
Max Weight of Workpiece (kg)	5
Max Diameter of Workpiece (mm)	40-120
Rotor Stack Thickness (mm)	30-120
Journal Diameter (mm)	φ8-34
Balancing Speed (r/min)	,≤2500
Balancing Motor Power (kw)	0.4 KW Servo Motor
Min Achievable Residual Unbalance Amount (g.mm/kg)	≤0.3
Testing Time (second)	8-12
Reduction Rate of Unbalance	≥90%
Working Pressure (MPa)	0.4-0.6
Operating Voltage (V)	AC: 380V external
Weight-Removing Method	Drilling
Drilling Power (kw)	0.75
Balancing Machine Type	Soft Bearing Measuring Bracket
Machine Power (kw)	6.75
Average Machine Consumption(l/min)	60
Protection	Phase sequence protection, overload protection, pressure monitoring